 |
____________________________________________________________________________________________
___________________________________________________________________________________________________________________________________________________ (Updated 06/04/07) We're wondering how snowflakes from the special Bandit edition from YearOne would look? Only $3200 for the set of four we're look at! Esh!! Paint the inserts body color... might be pretty cool. I took the time to PhotoShop the flakes with blue color, but left the picture on a different computer. This picture also gives us an idea of how much tire sidewall we'll need to fill up the wheel well. The ride height still not where it will be when finished!
(Updated 04/29/06) View of the modified and painted subframe. The A-arms have been switched out. otherwise everything is the same.
Still some issues to work out like the panhard bar, which will attach to the supporting tubing going from the frame rail to an underslug bar. Otherwise, we're pretty happy how it turned out the first time. The center-section is aluminum. The L-brackets where the spring bolts as well as the adjustable shocks are all the way down. This is not what the ride hieght will be.
(04/07/06) These babys will soon be on the car!
____________________________________________________________________________________________ 3-piece 12.5" drilled/slotted rotors, 4-piston calipers, SS brake lines, rear aluminum hubs, QA1 springs and adjustable shocks that are not yet on the car.
Picture of the under-slung bars and where the 4.11 Ford 9" aluminum center section rear-end with Moser 31 spline axles will go.
View of the torque arm when the interior was cut up to make room for muffles that ended up being a no go.
|
